25 Pt to Pixels – Full Calculation Guide

25 points (pt) equals 33.3333 pixels (px) when converted based on the standard resolution of 96 pixels per inch.

Points and pixels are two units of measurement used in digital design and typography. The conversion between them depends on the screen resolution, commonly set at 96 pixels per inch (dpi). Since 1 point is 1/72 of an inch, you can calculate pixels by multiplying points by 96/72.

Conversion Tool


Result in pixels:

Conversion Formula

The formula for converting points (pt) to pixels (px) is:
pixels = points × (96 ÷ 72)

This works because points are measured as 1/72 of an inch, while pixels depend on the pixel density of the screen, which is often 96 pixels per inch. Multiplying the points by 96/72 scales the measurement to pixels accordingly.

Example: Converting 25 pt to pixels:
– 25 pt × (96 ÷ 72) = 25 × 1.3333 = 33.3333 pixels

Conversion Example

  • 12 pt to pixels:
    • Start with 12 points.
    • Multiply by 96 ÷ 72 = 1.3333.
    • 12 × 1.3333 = 16 pixels.
  • 18 pt to pixels:
    • 18 points multiplied by 1.3333.
    • 18 × 1.3333 = 24 pixels.
  • 36 pt to pixels:
    • 36 points times 1.3333 equals 48 pixels.
  • 50 pt to pixels:
    • Multiply 50 by 1.3333.
    • Result is 66.6665 pixels.

Conversion Chart

The table below shows point values from 0.0 to 50.0, converted to pixels using the formula pixels = points × 1.3333. Each pixel value is rounded to four decimals. You can use this chart to quickly find pixel equivalents without calculation.

Points (pt) Pixels (px)
0.0 0.0000
5.0 6.6667
10.0 13.3333
15.0 20.0000
20.0 26.6667
25.0 33.3333
30.0 40.0000
35.0 46.6667
40.0 53.3333
45.0 60.0000
50.0 66.6667

Related Conversion Questions

  • How many pixels are in 25 points on a 96 dpi screen?
  • What is the pixel size for 25 pt font in CSS?
  • Is 25 pt bigger or smaller than 33 pixels?
  • How to convert 25 pt to pixels for web design?
  • Does 25 pt always equal 33.33 pixels on every screen?
  • What’s the formula to change 25 points into pixels?
  • How does screen resolution affect converting 25 pt to pixels?

Conversion Definitions

pt (point): A point is a unit of measure used in typography equal to 1/72 of an inch. It measures font sizes, line heights, and other layout elements in print and digital documents. The point helps standardize the size across different devices and media, providing consistency.

pixels (px): Pixels are the smallest unit of a digital image or display, representing a single point of color on a screen. Pixel size depends on screen resolution and density, and is used for defining dimensions, images, and fonts in digital interfaces and web pages.

Conversion FAQs

Why is 25 pt equal to 33.3333 pixels?

Because points measure physical length at 1/72 inch, and pixels are screen dependent. At a standard 96 dpi, every inch has 96 pixels. So 1 pt equals 96/72 pixels, or 1.3333 pixels. Multiplying 25 pt by this factor gives 33.3333 pixels.

Does the conversion change on higher resolution screens?

Yes, screens with higher dpi will have different pixel densities. For example, a 192 dpi screen doubles pixel density, so 25 pt would correspond to more pixels. The conversion relies on the pixel density, so pixels per point changes with screen resolution.

Can I use 25 pt directly in CSS for font size?

CSS does not support points reliably across all browsers and devices; pixels are more common. Using 25 pt in CSS might render differently depending on the device. It’s better to convert pt to px using the formula for consistent appearance.

What happens if I use a different dpi value in the formula?

The pixel value will change because pixels per inch changes with dpi. For example, at 120 dpi, 1 pt equals 120/72 = 1.6667 pixels. Using the wrong dpi can cause fonts or elements to appear larger or smaller than intended.

Is this conversion relevant for print design?

Print design relies on physical measurements, so points are more relevant than pixels. Pixels are screen-dependent and not absolute in print. For print, points directly measure size, but for screens, conversion to pixels is necessary.